Items tagged with input

Feed

Dear Community,

Entering a long line in 1D mode breaks at the right window bounday. How could I prevent this? I would like the entered line stay just as one, single, long line extending over the window boundary and I would like to use the bottom window scroll bar to view it. BTW it also does not appear, so how could I invoke it? I use Maple2016. I have neither found any information about this in the help, nor in the documentation.

Also is there a possibility to split the IDE screen vertically, as e.g. in Visual Studio? Looking at long programs this feature is very useful.

tx in advance,

best regards

Andras

I'm looking over a file someone else made (I jusut have the image of it not the .mw), and there's a line that looks like this:

H1|
    | t=0.45.

H1 is an equation is set from an interpolation expansion line, and I believe this input solves the equation when the variable t is equal to 0.45. But how do I enter this into Maple? Thanks.

Dear all,

I am trying to run a maple worksheet as an input file, in another maple worksheet. Therefore, I have exported my input worksheet to an inputfile (.mpl).

In the input file I have a variable H, which I vary in the second worksheet.

restart;
with(ExcelTools);
with(ListTools);
B := Import("C:\\Users\\s110950\\Dropbox\\Afstuderen\\New formula\\Importdata\\161005 - Staalprofielen.xlsx", "Blad1", "A7:AA344");

V := ["IPE 330", "IPE 360"];
currentdir("C:\\Users\\s110950\\Dropbox\\Afstuderen\\New formula\\Afrondingstraal")

for i  from 1 to 2 do
H := V[i];
cmaple.exe<"C:\\Users\\s110950\\Dropbox\\Afstuderen\\New formula\\Afrondingstraal\\Model38loop.mpl">;
 end do; 

However, it does not run the file. Does anyone know how to make it run?

Kind regards,
Bastiaan Overdorp

Hi @ all,

I was wondering if there is a way to display every character that i type in maple math input without any kind of automatic text editing (neither adding nor removing characters).

I find it very cumbersome to read and edit the modified input (afaik just from looking at a simple piece of printed (black and white on pamper) code it is impossible to destinguish atomic variables and indexed variables due to automatic text edit of the input to lower script in both cases).

 

Example 1: "True" Low Script (Not indexed variable!)
> a__1 :=3:

When I type this in 2-D Math Input (or Maple Input) the cursor jumps to lower script (atomic variable) after the second underscore which is not what i want to happen. After evaluating the expression it is very neat to see the "1" as lower sript but not during typing. Any mode or something to achieve this?

2. Example: Use a loop for dynamic variable creation (not because it is smart to do so but to illustrate my problem with maple input and automated text edit)

> for i from 1 to 4 do:
> x__||i:=1:
> end do:

I can not type this directly in any kind of maple input I have found. The concatenate symbol will be interpreted as subscript without escaping the automatically entered "atomic variable" mode which causes an error. After I use the arrow key to type "||i" outside "atomic variable mode" the loop variable i is not used as index anymore but instead appended to x as a number. But what i want is a dynamic variable creation with "true" numbered subscripts. I could use a longer version with cat() but this sucks (or I simply do not know how to type it properly).

I do not want to use or see atomic variables during input (or any kind of automatic text editing during input for that matter) !

So what I do Instead is I use a texteditor to type away, paste the code to maple and execute it. Works like a charm and my fingers do not have to leave their designated spots on the keyboard and i can type way faster. Furthermore I can always copy the code back to notepad++ and use regex to make a lot of simultaneous replacements at once whereas this is quite difficult with code that i typed in maple.

 

So how do I turn off automated text edit of the input? Or should I use anything else then a worksheet?

Cheers
Zorg

I have a worksheet (.mw) file that I want to export using a statement to avoid tedious GUI clicking.

How to export a worksheet (.mw) to Maple Input (.mpl) using a statement in the worksheet, so I can just execute the worksheet, and then the Maple Input (.mpl) file is generated?

 

I use Maple on a Surface Pro 4 tablet and the math input panel does not work with Maple.  This would be a great feature to have.  Or does anybody know how to get it working?

Some years ago a postdoc working with me insisted to use Maple, since he was used to it. He left me some *.mws files with some calculations we had published together. I'd like to re-use the code now, preferably transposed to C or another programming language (there is not much use of Computer algebra in the code). Unfortunately it appears not so easy. I found the free Maple reader, and at least can now see the code. However, I did not find a way to copy-paste code from the Maple reader to a text file, or any other way to store the code in readable format (avoiding the Maple reader). I try to store the code by printing from the Maple reader with a kind of pdf writer, and a process started which kept my Laptop busy for more than an hour now without any output.

At the moment it looks like the two years of Postdoc work is lost, thanks to Maple and its strange restriction policy.

Can somebody let me know how to save the Maple input code of a *.mws file in a text file?

 

 

I have a .mpl file containing some procedures and other code.
When I open the file, everything is placed in a single execution group
(I use 1D math, worksheet mode).

Is it possible to have distinct execution groups?
For example, after each two blank lines (or other separator) in the .mpl file.

The same question when using .txt files as Maple input (in this case the code being not executed).

Thank you.

sqrt(5) gives sqrt(5)

sqrt(1+sqrt(5)) gives "You have entered an invalid Maple expression"

sqrt(u) gives sqrt(u)

sqrt(1+u); gives "You have entered an invalid Maple expression"

 

when using the Maple Math icon. How can I get the correct input for the two expressions?

Hi, does anyone know how to choose the variables that populate the DAE Variables box when you use "equation extraction"?

I want the result to be in terms of the voltage source and the voltage drop across the capacitor for a RLC circuit.  I want to be able to choose the input-output variables for the final equation.

 

 

hi .by changing amount of variable such as '' f '' or 'D5 ' in input data, not changing  in final result!!!!please chek attached file 

thanksX4.mw

I have run into a problem with a file I am preparing for a class. The file is in Document mode with one large section and a number of subsections. Input is 2-d input.

The first subsection behaves normally, input is there, output is there and so on.

The second section does not display the input. The input is still there, somewhere, as the sheet recalculates properly and I can also see there is input when looking at the file with an editor. But no show in Maple.

The third subsection does not show input either.

The fourth subsection is normal again and shows input.

Each of these sections is several screens long. The file actually is an older one where I am adding subsections. The first one (that works normal) is a new one. The original file (before I edited it to add a subsection) works fine still.

So I assume I inadvertently did something that causes this, even though the old subsections are not being edited. I do load Physics[Vectors] but cannot believe that does it. The original file also loads it.

The file was created in Maple 15 and that is where I edited this one. I opened it in Maple 2015 on a different computer, but the behaviour is identical.

Again, the input is there somewhere; the sheet recalculates corrrectly, but I cannot edit the input in the sections that do not show it (I guess that is not a surprise, but it excludes things like a white font color on a white background as there is nothing to select).

Does anyone have a hint how to unhide the input? I tried many things (menu, contextual menu, prefs,...) but no help. It is actually kind-of annoying.

FWIW, this is on Mac OS X, 10.10.5 Yosemite for Maple 2015.1. And 10.5.8 for Maple 15.

Thanks,

M.D.

 

NULLIn TEXT MODE the greek letters phi and varphi behave peculiarly in text entries inside text box in drawing. If it is the first letter it prints alright. Otherwise they rverse themselves (phi to varphi and viceversa). Is this solvable?

 

NULL

 

Download A_DOUBT_on_phi_varphi.mw


 


 

 

Ramakrishnan V

rukmini_ramki@hotmail.com

 

I am using Maple 15, and before that Maple 8 and Maple 13. While using the versions 13 and 15, 

I come across with this problem; I cannot copy an output and use it as input. In Maple 8, I was able to do this but in 

these improved versions, it seems that it is not possible. Is there a way to solve this problem? I saw some answers about this

problem suggesting to change launch.ini file. But I could not apply this suggestion, since it is not permitted by the system. 

Are there any commands in maple that will help me find a suitable function that approximates the numerical solution of:



  restart;
  PDE := diff(v(x, t), t) = diff(v(x, t), x, x);
  JACOBIINTEGRAL := int(JacobiTheta3(0, exp(-Pi^2*s))*v(1, t-s)^4, s = 0 .. t);
  IBC:= D[1](v)(0,t)=0,
        D[1](v)(1,t)=-0.000065*v(1, t)^4,
        v(x,0)=1;
#
# For x=0..1, t=0..1, the solution varies only very slowly
# so I have increased the timestep/spacestep, just to speed
# up results generation for diagnostic purposes
#
  pds := pdsolve( PDE, [IBC], numeric, time = t, range = 0 .. 1,
                  spacestep = 0.1e-1, timestep = 0.1e-1,
                  errorest=true
                )

diff(v(x, t), t) = diff(diff(v(x, t), x), x)

 

int(JacobiTheta3(0, exp(-Pi^2*s))*v(1, t-s)^4, s = 0 .. t)

 

(D[1](v))(0, t) = 0, (D[1](v))(1, t) = -0.65e-4*v(1, t)^4, v(x, 0) = 1

 

_m649569600

(1)

#
# Plot the solution over the ranges x=0..1,
# time=0..1. Not a lot happens!
#
  pds:-plot(x=1, t=0..1);

 

#
# Plot the estimated error over the ranges x=0..1,
# time=0..1
#
  pds:-plot( err(v(x,t)), x=1,t=0..1);

 

#
# Get some numerical solution values
#
  pVal:=pds:-value(v(x,t), output=procedurelist):
  for k from 0 by 0.1 to 1 do
      pVal(1, k)[2], pVal(1, k)[3];
  od;

 

t = 0., v(x, t) = Float(undefined)

 

t = .1, v(x, t) = .999977377613528229

 

t = .2, v(x, t) = .999967577518313666

 

t = .3, v(x, t) = .999959874331053822

 

t = .4, v(x, t) = .999952927885405241

 

t = .5, v(x, t) = .999946262964885979

 

t = .6, v(x, t) = .999939702966688881

 

t = .7, v(x, t) = .999933182128311282

 

t = .8, v(x, t) = .999926675964661227

 

t = .9, v(x, t) = .999920175361791563

 

t = 1.0, v(x, t) = .999913676928735229

(2)

 

 

 

Download PDEprob2_(2).mw

 

I am refering to the first graph, is there a way in maple to find an explicit suitable approximating function?

I.e, I want the function to have the same first graph obviously, it seems like addition of exponent and a line function, I tried plotting exp(-t)-0.3*t, it doesn't look like it approximates it very well. Any suggestion on how to implement this task in maple?

Thanks.

 

1 2 3 4 5 6 7 Last Page 1 of 35