Controlled platform with 6 degrees of freedom. It has three rotary-inclined racks of variable length:
and an example of movement parallel to the base:
Perhaps the Stewart platform may not reproduce such trajectories, but that is not the point. There is a way to select a design for those specific functions that our platform will perform. That is, first we consider the required trajectories of the platform movement, and only then we select a driving device that can reproduce them. For example, we can fix the extreme positions of the actuators during the movement of the platform and compare them with the capabilities of existing designs, or simulate your own devices.
In this case, the program consists of three parts. (The text of the program directly for the first figure : PLATFORM_6.mw) In the first part, we select the starting point for the movement of a rigid body with six degrees of freedom. Here three equations f6, f7, f8 are responsible for the six degrees of freedom. The equations f1, f2, f3, f4, f5 define a trajectory of motion of a rigid body. The coordinates of the starting point are transmitted via disk E for the second part of the program. In the second part of the program, the trajectory of a rigid body is calculated using the Draghilev method. Then the trajectory data is transferred via the disk E for the third part of the program.
In the third part of the program, the visualization is executed and the platform motion drive device is modeled.
It is like a sketch of a possible way to create controlled platforms with six degrees of freedom. Any device that can provide the desired trajectory can be inserted into the third part. At the same time, it is obvious that the geometric parameters of the movement of this device with the control of possible emergency positions and the solution of the inverse kinematics problem can be obtained automatically if we add the appropriate code to the program text.
Equations can be of any kind and can be combined with each other, and they must be continuously differentiable. But first, the equations must be reduced to uniform variables in order to apply the Draghilev method.
(These examples use implicit equations for the coordinates of the vertices of the triangle.)