hello people

I have this computation which has to do with my undergraduate project and each time I compute some work (vary parameters), it seems to evaluate forever. although my computer isn't recent and has 2GB of RAM the computation didn't seem to me as much of a task for it. computation works fine with some parameters as 0 but the moment I change it to a natural number, it evaluates forever.

Is there anyway I could speed up computation in maple? or do I just need a faster computer? but I have a dead line for next week. can I upload my worksheet for someone here to help me execute? 

thank you in advance. 

Hello everybody,

my question concerns the visualizing possibilities of maple:

can maple visualize complex functions? (f(z): C->C)

If so, which possibilities do i have und what is the command for it? Maybe as a coulour diagram, as a vector field (f(x): R^2->R^2) , or as mapping of sets (e.g. curves, grids into new curves and curved lines)?

Thanks in advance

regards

Nikita

PS: I am using maple 18.

I am trying to see how do I have initial conditions in a system of differential equations. This is an example problem, which doesn't work. What is wrong? Thank you.

I want to make a package that I have created work with the LinearAlgebra package that comes with Maple. My package loads into a worksheet fine, but when I try to use one of my procedures, most of which depend upon procedures in the Linear Algebra package, the executable part of my procedure from my package is simply echoed to the screen and not executed. If I then copy the echoed part to a command prompt then it executes fine. How do I make my package use the commands in the Linear Algebra package?

Hello!
Try to consider the following system of differential equations:

sys := diff(U(ksi), ksi) = (y(ksi)-(1.5*(1+0.01*ksi))*U(ksi)/ksi)/(1.5+0.015*ksi+0.002*ksi^2),
diff(y(ksi), ksi) = U(ksi)*(0.002+(1.5*(1+0.01*ksi))*(0.002*ksi^2)/(ksi^2*(1.5+0.015*ksi+0.002*ksi^2))-19.3^2)-y(ksi)*(0.002*ksi^2)/(ksi*(1.5+0.015*ksi+0.002*ksi^2))

with the boundary conditions: cond:= y(0.8) = 0, y(1) = 0

And Maple gives me zero solution for this system , i mean U(from 0.8  to 1) = 0 and y(from 0.8 to 1) = 0

How can i get some other solutions?


P.S. i need numerical solution => dsolve( [sys,cond],type= numeric)

Please, i need some help.

I want to calculate this limit

limit((b^(d+1)-1)/((b-1)*b^d), d = infinity)

but it always return limit((b^(d+1)-1)/((b-1)*b^d), d = infinity)

Is it becaus it cant recognize what b symbol is ?

Hi,

I am trying to use implicit plot. The plot is OK but I want to put labels such as what Latex produces :

$\frac{\Omega}{\omega_n}$ for x axis and $a_0 \mathrm{(m)}$ for y axis

How can I apply this in my maple code as below:

plot1:=implicitplot(a3, Omega_r=1.5..2.5, a=0.00000001..0.1, labeldirections=[horizontal, horizontal], axes=boxed, labels=["W/w_n",typeset("a_0 (m)")], labelfont=[SYMBOL]):

What I have put as bold does not work for me, it is making everything in Greek :) . I want combination of Greek and math.

Thasnks,

Bahareh

Hi!

This question is related to http://www.mapleprimes.com/questions/204419-Derivatives-Of-Splines-Are-Not-Defined and http://www.mapleprimes.com/questions/42114-Problem-With-Spline-Integrating , however I have not been able to apply the solutions given there to my problem.

I have a set of points given by

and certain function value points given by

where e1 is the function I am approximating.

Using

I come up with my piecewise function.

When I do diff(e4,x), however, the points at the nodes show "float(undefined) x=0.2..."(the node).

As it turns out, the value of the derivative on the left of the node is not equal to that of the right side by a factor of 10^(-7), in other words, numerically unimportant but high enough for maple to realise it is not the same number. How could I tell Maple that I am happy choosing, for example, the value given by the function on right side of the node?

I welcome any suggestions.

Many thanks in advance.

Every time I try to write a procedure I get stuck.

This time is no different:

restart;

global a:=0.081819221, PI:=3.1415926535897932384626433832795;
Ecce:=proc(lt)
lat:=lt*(PI/180);
b:=((1-a*sin(lat))/(1+a*sin(lat)))^(a/2));
t:=ln((tan(PI/4)+lat/2));
d:=3437.7468*t*b;
return d;
end proc;

I digit the following to get a result
Ecce(45.2112);

and this is what I get (in blue)
Ecce(45.2112)

Every single time. I can never have a procedure that works right away. It's getting on my nerves

I want to extract all the symbols and last trade from 

http://finance.yahoo.com/q/cp?s=%5EIXIC

I have tried:

status, data, headers := HTTP:-Get("http://finance.yahoo.com/q/cp?s=%5EIXIC");
data;

but it just gives me a bunch of jiberish! Any ideas?

please i would love make a 3d plot of this Bessel function expression against the parameter p and T[0] using maple (p^(((2+deltaT[0])/(2)))*(C[1]*BesselJ((delta)/(-2)*sqrt(T[0]-4 T[g]),(-((T[g])/(T^(2)[0])*gamma*G*delta*sqrt(alpha*k))/(p))+C[2]*BesselY((delta)/(-2)*sqrt(T[0]-4 T[g]),(-((T[g])/(T^(2)[0])*gamma*G*delta*sqrt(alpha*k))/(p)) where [delta = 0.2e-2, T[g] = (1.1, .615, .48, .2962), k = (1.2, 1.3, 1.4, 1.5), G = .2, gamma = .2, alpha = 5.36, C[1] = 500, C[2] = 100,p = (.22, .23, .24, .25), T[0] = (3.666667, 2.307692, 1.714286, 1.377778)

we can get the continued fraction of cot(x) with the command

> convert(cot(x), confrac, x, 6)

the result is

(1+x^2/(-3+x^2/(5-(1/7)*x^2)))/x

how could I convert this result to a form like

1/x-(1/10)*x+49*x/(20*x^2-210)

In this work the theme of vector analysis shown from a computational point of view; this being a very important role in the engineering component; in civil and mechanical special it is why, using the scientific software Maple develops interactive solutions for long processes through MapleCloud calculations. At present the majority of professors / researchers perform static classes open source leaves; so that our students learn and memorize commands, thus generating more time learning in the area. Loading Bookseller VectorCalculus develop topics: vector algebra, differential operators, conservative fields, etc. Maplesoft making processes provide immediate calculations long operation Embedded Components displayed in line with MapleNet integrations. Today our future engineers to design solutions and will be launched in the cloud thus being a process with global qualification in the specialty. Significantly Maple is a scientific software which allows the researcher to design their own innovations and not use themes for their manufacturers.

III_CRF_2015.pdf

CRF_2015.mw

L.AraujoC.

I have some excel data which I need to fit in the formula:

0.5a*erfc(0.5*2^0.5*(-x+m1/s1)) + (0.5-0.5a)*erfc(0.5*2^0.5*(-x+m2/s2))

In this formula the coefficient m ans s are mean and standard deviation and a is the weigth of 2 peak in a cummulative gaussian distribution.

I fitted this (I will insert the maple file) and found:

-48736.43 erfc(-0.707x + 0.707) + 48736.43 erfc(0.707x + 0.707)

Can this be correct?

And how do I find the values of m1, s1, m2, s2 and a?

data.xlsx

data_fit.mw