Maple 15 Questions and Posts

These are Posts and Questions associated with the product, Maple 15

How do I prevent that maple scrolls through the worksheet and stops at the bottom when I want to execute the  whole worksheet. If i want to execute the whole worksheet I just want to stay at the same place in the worksheet and I also don't want to expand previousily closed sections. I use document mode. Thanks in advance

Hi all,

I have an array [1..2503] y-axis for different values,  x-axis [0..180], 

when I plot these two arrays its not possible.   but if I change x-axis [1..2503] then plot is ok... I want to plot x-axis [0..180] and y-axis [1..2503]



A.Q   Soton

Hi everyone,

I tried to solve the following system of equations with Maple 15:

You can copy paste the commands below to get the equations
pde1 := [diff(`#msub(mi("n"),mo("&uminus0;"))`(x, t), t) =
diff(`#msub(mi("n"),mo("&uminus0;"))`(x, t), x)+n[o](x, t)-`#msub(mi("n"),mo("&uminus0;"))`(x, t)]


pde2 := [diff(n[o](x, t), t) = 0.3139e-2*(diff(n[o](x, t), x, x))-2*n[o](x, t)+`#msub(mi("n"...

When using Maple 15, sometimes the pagackages and formulas that were previously defined seem to completely drop it.  I'll load packages and assign variables at the beginning of my project, yet after maybe 10 minutes or so, I have to redefine my variables and reload my pacakges.  I have noticed that it happens more often if I try to switch over to the "Text" tab and then back to "Math."  It's very intermittent, Maple will be working just fine churning out graphs,...


   The error showed up whenever I tried to do the Maximum Likelihood Estimation with Global Optimization Toolbox.My objective (likelihood ) function f is defined as follows(A1 to A5 are intermediate variables; parameters  are x[1] to x[12]):

   f := 0;

   for j from 1 by 1 to 21 do

       A1 := exp(x[1]+x[2]*c[j]);

       A2 := exp(x[3]+x[4]*c[j]);

Dear all,

Maple gives me the complete solution to the attached PDE. This solution is expressed in terms of KummerU and KummerM. What I want is to obtain the solution for real numbers only, i.e. I want to get rid of the possible imaginary numbers in the solution. This implies that the separation constant, _c1, must be less or equal to 2r. 

How can I do this?

Furthermore, the four arbitrary constants will need to be determined through boundary conditions....

I've made exam questions for students that they have to answer by doing some calculations in Maple.

I would like to let them copy the commands they used to a Maple TA text field.

However, the standard worksheet in our computer lab uses 2-D math. Copying this 2-D math to Maple TA works fine with "paste as plain text", but copying 1-D math also works with ctrl-v in Maple TA, which is more convenient for students under stress.

Since I am not allowed change...

Hi all,

I have data which I want to give a simpler and a smaller interpolation function. Not necessary with Cubicspline as in the code attached (polynomial, exponential, etc..).

Thanks in advance

I don't know why maple can't solve this PDE

> restart;

> PDE := 4.2000*10^6*(diff(u[1](x, t), t))-.445*(diff(u[1](x, t), x, x))+4200.*u[1](x, t)+464.82-20836.*x-15.832*t+4.0442*10^5*x^2+2953.7*x*t+0.14631e-1*t^2+9.6788*10^6*x^3-2.7139*10^5*x^2*t-.99786*x*t^2+0.15902e-4*t^3-1.0085*10^9*x^4-6.3082*10^6*x^3*t-1069.3*x^2*t^2-0.15006e-1*x*t^3-3.9073*10^(-8)*t^4+2.3478*10^10*x^5+2.5874*10^8*x^4*t+1.2265*10^5*x^3*t^2+2.9028*x^2*t^3+0.17521e-4*x*t^4+1.9407*10^(-11...


I am running a home network, XP and Maple 11 on the old computer, Win 7 and single-user Maple 15 on the new.

It took a long time, but I finally got a wireless network running, so that Win7 on the new computer can open and access all the files on the old computer.

But when I run Maple15 on the new computer and try to open an old computer file, Maple 15 cannot see the old computer or any of its directories, even though it has a "network" tab on the "open" command.

3 4 5 6 7 8 9 Last Page 5 of 47