I have written the maple code to calculate time domain value of the laplace domain equation. It contain slowly converge double series so that I used epsilon algorithm to accelerate convergence. one summation contain 7 terms and another summation terms reduce to 850 terms after the use of epsilon alorithms. I also used deHoog algorithm with 9 terms to obtain time domain data but maple give the following error:

Error: (in evalf/exp/general) object too large

Do...

Using the Turtle program as seen in the attached Maple document where

R - right turn
L - left turn
F - forward movement
B - backwards movement

I have the basic shape, but I dont know how to write a procedure so that it repeats at the necessary spots to create a fern that looks like this:

fern.mw

I have bracket matching turned on but donot get the rectangular yellow box around matching brackets as shown in the attached picture. Can anyone help me how to turn this feature on for both input and output?

http://www.maplesoft.com/support/help/Maple/view.aspx?path=LinearAlgebra/ToeplitzMatrix
http://en.wikipedia.org/wiki/Toeplitz_matrix

in wiki it started from 1 at [1,1] if using below

however maple package started from 5

restart;

x := 1;

y := 3;

input := [1, 2, 3, 4, 5, 6, 7, 8, 9];
with(LinearAlgebra):

T1 := ToeplitzMatrix(input, 3);

T1 := Transpose(result);

i interpolate data and result in 96 equations

and then solve them and saved their roots into Vector roo, each of roo has 3 roots

and would like to animate first root of 96 equations, second root of 96 equations to see how roots move 

however meet difficulty when animate, how to animate this

moreover, is it possible to slow down the anime when playing it

> roo; Vector(4, {(1) = ` 1 .. 99 `*Vector[column], (2) = `Data Type: `*anything, (3...

Hi,

I have this system of lienar equations:

If I have the parameters-(v,k,lambda) of a combinatorical design, I wonder whether I can get the incidence matrix of the design or not with maple.

Remark:v is the number points of the design; k is the number of points on each line; lambda is the number of points common on every two lines.

Thanks!

I've a problem with the buttons. It's not a problem to make a line break, but if I reload or change the text into my button (while the program ist running) maple/maplets ignores all line breaks.

Here is an small example (maybe not the best):

with(StringTools):
with(Maplets[Elements]): ToGreen := proc()
Maplets:-Tools:-Set(B(caption) = "blue\nhallo");
end proc:

maplet := Maplet([   

http://math.stackexchange.com/questions/376240/how-to-calculate-grobner-basis-for-syzi-f1-f2-g1-g2

http://math.stackexchange.com/questions/376980/why-syz-algorithm-for-module-have-dimension-problem-how-to-divide-vector-and-mu

Are There  options to solve this problem?

I solved a PDE system and got module() export plot,plot3d,animate,value,settings; ... end module (Got ui(x,t) and ur(x,t))
And after it I try to solve the task
Xs := [0, .175, .789, 1.818, 3.287, 5.183];
n := 1;
interface(prettyprint = 1);
for t1 from 0 by 50 to 50 do
k1 := sol:-value(t1, output = listprocedure);

Hello,

for my mechanical engineering studies we have to optimize an engine during a workshop. Therefore we have to use a numerical dsolve to solve the equation of motion. I have to get the maximum bearing reaction for a constant rpm. In order to get this I can't think of anything else but use the dsolve solution and use it in maximize.

ysk_2 := t -> -rc*cos(phi(t))-lp*cos(alpha(t))-lkb-y(t);
ysp_2 := t -> -rc*cos(phi(t))-lp2*cos(alpha(t))-y(t);

i have 12 second order non linear coupled partial differential equations (Euler-Lagrange Equations) in 12 variables {u1a(x1+l/2),u2a(x1+l/2),u3a(x1+l/2),theta1a(x1+l/2),theta2a(x1+l/2),theta3a(x1+l/2), u1p(x1,x2),u2p(x1,x2),u3p(x1,x2),theta1p(x1,x2),theta2p,theta3p}

also there are 17 lagrange multipliers in these equations which are also to be solved, using 17 constraints equations.

along with 48 boundary conditions. These have emerged out of variational formulations

Hi,

I've been trying to manipulate the equations of a mechanism that I've exported from MapleSIM.  The system equations contain 4 differential ordinary equations, and 6 algebraic equations.  In MapleSIM it simulates fine, but I'm having problems simulating it in maple alone (without multibody exports).

I've tried solving the initial value problem by replacing all the time dependant variables with constants, (and as this is a dynamics problem) I supplied...