Who was the creator of Maplesoft?

A friend asked me a question and I didn't know the answer to give him. So I decided to share the question with you guys. According to him, Is there an inbuilt function in maple that we can use to specify "time" on a worksheet/document? What the time does is to run or execute the worksheet/document at the time stipulated. Meaning in his absense, he wants maple to run a particular worksheet at a particular time which he will decide.Hope my question is sensible?

Or I didn't get something right? This is with Maple 16.02 on a Mac:

> for i from 1 to 10 while i<=5 do print(i) end do; #works all right
> for i from 1 to 10 while i>=5 do print(i) end do; #nothing shows up?

M5 :=series((1+1/(2*a^2)+(1/2)*b^2-1/(2*a))^a, a=0,3);

there is a variable b too

M6 := 1+(-ln(2)-2*ln(a))*a+(-1+(1/2)*(-ln(2)-2*ln(a))^2)*a^2;
with(gfun):
seriestoratpoly(series(M6, a, 4), ['egf']);

A little late in the game, with no Maple 18 wishlist yet I'd like to get it started

granted all wishes for previous versions not yet applied should still, hopefully, be under consideration.  

1 - The abitlity to angle x-axis labels.

2 - Textplot option for text to rotate with graph as it is rotated.  Currently all textplot texts are held to the horizontal

Thanks to the community through Maplesoft Mapleprimes that could develop in Computational Mathematics Achievement Day at our institution.

I'm trying to solve the following inequality:

ln(x+1)<x^2-1

but the solve command returns:

"Warning, solutions may have been lost"

Can someone halp me?

Thank you.

Carmelita

u := x -> Int(exp(-(xi-x)^2)*exp(xi), xi = -infinity .. infinity, method = _d01amc);
evalf(u(0.));

gives an error

u := x -> Int(exp(-(xi-x)^2)*exp(xi), xi = -infinity .. infinity);
evalf(u(0.));

2.275875794

u := x-> Int(exp(-(xi-x)^2+xi), xi = -infinity .. infinity, method = _d01amc);
evalf(u(0.));

2.275875794


A bug is suspected...

I have exported Maple code as a Maplet file.  When I click on the file Maplet Launcher opens but nothing "runs".  It looks like it's trying because the icon flashes, but no window opens.  The Maple worksheet from which the Maplet was generated runs fine.

Any suggestions as to how to get Maplet Launcher to run my Maplets?

Thanks,

Rollie

Good afternoon sir.

I request your kind suggestion to the above cited query.

With thanks & Regards

M.Anand

Assistant Professor in Mathematics

SR International Institute of Technology,

Hyderabad, Andhra Pradesh, INDIA.

Hi everyone.

i want to undestand how to use the passing by reference in Maple i do this:

generate_x := proc (x)

    x := (rand(1 .. 10))()

end proc;

generate_y := proc (y)

    y := (rand(1 .. 5))();

    print(y)

end proc;

print_xy := proc ()

     local x, y;

     generate_x(x);

     print(x);

     generate_y(y) end proc;

print_xy();

#print(x)  works but generate_y(y) doesn't print the value of y.

Can you help me to understand WHY i dont get the print of y.

Thanks and happy christmas to you!

Hello,

Is it possible to have the labels of the x-axis and of the tickmarks above the axis?

Thank you!

Polya deals out cards from a deck one by one. How many cards must Polya deal out until he is sure that a flush (five cards of the same suit) has appeared amongst the dealt cards? What if Polya wants a straight (five cards in sequence, with an ace counting low or high)?

 The answers are 17 and 45, but how? in Maple?

for the flush the chances are 1/numbperm(13,5)/numbperm(4,1)

for the straight 1/10/numbperm(4,1)^5. 

http://www.math.hawaii.edu/~ramsey/Probability/PokerHands.html

Hello,

In a mechanical problem, i have to deal with a system with trigonometric expression. The variables are gamma[1](t), psi[1](t), phi[1](t), alpha(t), beta(t), x(t). The orthers are parameters.

I would like to have a explicit relations between  gamma[1](t), psi[1](t), phi[1](t) and alpha(t), beta(t), x(t).

In orthers words, i would like to have 

alpha(t)= f(gamma[1](t), psi[1](t), phi[1](t)).

beta(t)= f(gamma[1](t), psi[1](t), phi[1](t)).

 x(t) = f( gamma[1](t), psi[1](t), phi[1](t)).

Of course, the expresions of alpha(t), beta(t), and x(t) should be complex. Nevertheless, it will avoid me to have to solve Newton Raphson algorithm to solve these constraints equations.

Normally, it should be feasible.

When i have only one equation and not a system, isolate function is helpful.

But in this case, i don't manage to have my relations.

Have you some ideas to expression these relations ?

alpha(t)= f(gamma[1](t), psi[1](t), phi[1](t)).

beta(t)= f(gamma[1](t), psi[1](t), phi[1](t)).

 x(t) = f( gamma[1](t), psi[1](t), phi[1](t)).

Here the code of the equations :

restart:
with(LinearAlgebra):
with(Student[MultivariateCalculus]):
with(plots):
constants:= ({constants} minus {gamma})[]:
`evalf/gamma`:= proc() end proc:
`evalf/constant/gamma`:= proc() end proc:
unprotect(gamma);
restart:
with(LinearAlgebra):
with(Student[MultivariateCalculus]):
with(plots):
constants:= ({constants} minus {gamma})[]:
`evalf/gamma`:= proc() end proc:
`evalf/constant/gamma`:= proc() end proc:
unprotect(gamma);
eq_liai[1]:= rF[1]*cos(a[1])-cos(a[1])*cos(gamma[1](t))*e[1]-l[1]*(cos(phi[1](t))*cos(a[1])*cos(gamma[1](t))*cos(psi[1](t))-cos(phi[1](t))*cos(a[1])*sin(gamma[1](t))*sin(psi[1](t))-sin(a[1])*sin(phi[1](t)))-cos(alpha(t))*rBTP[1]*cos(a[1])-sin(alpha(t))*sin(beta(t))*rBTP[1]*sin(a[1])-sin(alpha(t))*cos(beta(t))*h = 0;
eq_liai[2]:= rF[1]*sin(a[1])-sin(a[1])*cos(gamma[1](t))*e[1]-l[1]*(cos(phi[1](t))*sin(a[1])*cos(gamma[1](t))*cos(psi[1](t))-cos(phi[1](t))*sin(a[1])*sin(gamma[1](t))*sin(psi[1](t))+cos(a[1])*sin(phi[1](t)))-cos(beta(t))*rBTP[1]*sin(a[1])+sin(beta(t))*h = 0;
eq_liai[3] := h[1]+sin(gamma[1](t))*e[1]+l[1]*(sin(gamma[1](t))*cos(psi[1](t))+cos(gamma[1](t))*sin(psi[1](t)))*cos(phi[1](t))+sin(alpha(t))*rBTP[1]*cos(a[1])-cos(alpha(t))*sin(beta(t))*rBTP[1]*sin(a[1])-cos(alpha(t))*cos(beta(t))*h-z(t) = 0;

or directly a maple file

constraints.mw

Thanks a lot for your help